TC-9000 - Standard Laser Flash Thermal Constants Analyzer

   ULVAC Technologies, Inc.
   401 Griffin Brook Drive
   Methuen, MA 01844

Tel: 978-686-7550
Fax: 978-689-6300

Standard Laser Flash Thermal Constants Analyzer

TC9000 TC 9000

ULVAC-RIKO systems make the difference in research and development and quality control of high-tech materials. ULVAC-RIKO's system use the widely accepted Laser Flash method to measure three thermal constants: thermal conductivity, thermal diffusivity, and specific heat. Since 1970, ULVAC-RIKO has delivered over 300 laser thermal constants measuring units around the world. Now ULVAC-RIKO presents its most advanced laser thermal constants measuring system: the TC-9000. ULVAC-RIKO's TC-9000 has the latest technology to meet the increasingly diversified needs for thermal measurement.

Specifications

Model Item	TC-9000L	TC-9000H		TC-9000UHV

Measurement temperature	-150°C ~ 200°C	Room temperature to 1500°C		Room temperature to 2200°C
Sample Size	10mm dia. X 1mm to 3mm thick
Sample irradiating light	Glass laser output 10 J/pulse FWHM 0.1 msec/0.3 msec or less
Sensor	Thermocouple	Thermocouple, IR detector		IR detector
Measurement	Thermal diffusivity, specific heat capacity, thermal conductivity
Data analysis method	t ½ (half time) method, logarithmic method, curve fitting method*
Footprint	800 mm wide X 1050mm deep		1700 mm wide X 1500 mm deep
Power requirements	200 VAC single phase, 10A 100 VAC, 15 A each one	200 VAC single phase, 30A 100 VAC, 15 A each one		200 VAC single phase, 80A 100 VAC, 15 A each one
Cooling water requirements	City water 5L/min or more
Measurement atmosphere	Low pressure helium gas	Vacuum or air down to 150°C		Vacuum

Model Item	TC9-Low	TC9-STEP	TC9-SB1	TC9-SB2

Measurement temperature	-150°C ~ 200°C	Room temperature to 1000°C	Room temperature	Room temperature to 200°C
Sample Size	Same as TC-9000	30mm dia X 3 to 5 mm thick	25mm square X 1mm or less thick
Sample irradiating light	Same as TC-9000	Halogen light	Same as TC-9000
Sensor	Thermocouple		Same as TC-9000
Measurement properties	Same as TC-9000		Thermal diffusivity
Data analysis method	Same as TC-9000	Step method	Same as TC-9000
Footprint	-	300 mm wide X 650 mm deep	-
Power requirements	-	100 VAC, 30 A	-
Cooling water requirements	City water 5L/min or more		-
Measurement atmosphere	Low pressure helium gas	Low pressure argon gas	Air

* The curve fitting method is the analysis method provided by the National Institute of Advanced Industrial Technology and Science

For more information
Please Email Us
TEL : 978-686-7550/ FAX : 978-689-6300