TC-7000 - Standard Laser Flash Thermal Constants Analyzer

   ULVAC Technologies, Inc.
   401 Griffin Brook Drive
   Methuen, MA 01844

Tel: 978-686-7550
Fax: 978-689-6300

Standard Laser Flash Thermal Constants Analyzer

TC7000

ULVAC-RIKO systems make the difference in research and development and quality control of high-tech materials. ULVAC-RIKO's system use the widely accepted Laser Flash method to measure three thermal constants: thermal conductivity, thermal diffusivity, and specific heat. Since 1970, ULVAC-RIKO has delivered over 300 laser thermal constants measuring units around the world. Now ULVAC-RIKO presents its most advanced laser thermal constants measuring system: the TC7000. ULVAC-RIKO's TC7000 has the latest technology to meet the increasingly diversified needs for thermal measurement.

Specifications

Standard Model	TC7000-HNC
Temperature Range	Room temperature to 1,500degC
Atmosphere	Vacuum Air or reducted pressure inert gas is also possible below 300°C
Sample Size Standard mesurement method	10mm-dia. X 1 to 3mm thick disk solid sample. For pure Aluminum sample, Thickness is 2mm minimum.
Back Temperature Sensor	Themocouple (R type) and infrared temperature sensor
Thermal Conductivity Measurement Range	0.1W to 400mW/mK
Measuring Reproducibility	Thermal diffusivity within +/- 3% Specific heat within +/- 7% Thermal conductivity within +/- 10%
Laser	Normal oscillation type glass laser (wavelength 0.69um)
Transient Memory Sampling Time	1us to 5ms/Word X 8K Words
Utility Requirement	Power: 200 or 220VAC, single phase, 40A Cooling water: city water 7 lit/min.
Space Requirement	2,000mm wide X 1,300mm deep
Weight	About 350Kg
Option	Attachment for two dimensional method. Sample size: Thin plate larger than 25mm square and less than 1mm thick.

For more information
Please Email Us
TEL : 978-686-7550/ FAX : 978-689-6300