|
|
 |
|
|
 |
ULVAC Technologies, Inc.
401 Griffin Brook Drive
Methuen, MA 01844
Tel: 978-686-7550
Fax: 978-689-6300 |
|
|
 |
|
|
Nano Particles Technology
Dispersed Nano particle paste is
new type of paste, which consists of 0.01um diameter nano
particles. These pastes can be used to easily form a film
of Au, Ag, Cu, etc. by brush-spreading, dipping, spin-coating,
etc.
Products Available
Perfect Gold |
Au
Solution |
Perfect Silver |
Ag
Solution |
Nanometal Ink Technology
Ulvac offers
Gold, Silver and ITO nanometal inks for inkjet printing
applications. Particle sizes are typically between 3 to
7 nm, and various types of metal % content, solvents and
viscosities are available, as described in the matrix
chart below.
Nanometal Ink Product
| Product
Name |
Au-Nanometal
Ink |
Ag-Nanometal |
Ag-Nanometal
Ink
(Low Temperature Type) |
ITO-Nanometal
Ink |
| |
Au1T |
Au1TeH |
Au2T |
Au2az |
Au1T |
Au1TeH |
Au2T |
L-Ag1T |
L-Ag1TeH |
ITO01Dn |
|
For Ink Jet |
N/A |
Good |
N/A |
N/A |
N/A |
Good |
N/A |
N/A |
Good
|
Good |
| Metal
Content (wt%) |
30 |
60~70 |
40 |
55~60 |
30 |
55~60 |
30 |
30 |
55~60 |
20 |
Solvent |
Toluene |
n-tetradecane |
Toluene |
Tetradecane |
Toluene |
Tetradecane |
Toluene |
Toluene |
Tetradecane |
Decalin |
Adhesiveness
Improving Additives |
-- |
-- |
Cu, Bi |
Cu, Bi |
-- |
-- |
Cu, Bi |
-- |
-- |
-- |
Ave.particle
size (nm) |
3~7 |
Viscosity
(mPa's)
|
<5
|
5~15
|
<5
|
4000~10000
|
<5
|
5~15
|
<5
|
<5
|
5~15
|
<5
|
Properties of curing layer (Data provided hereunder is
for reference only and not guarantee)
| Curing
Condition |
350°Cx30min
or
300°Cx30min |
300°Cx30min |
220°Cx30min |
150°Cx60min |
*1 |
| |
<1 |
<1
|
<1 |
<2 |
<1 |
<1 |
<1 |
<1 |
<1 |
<0.5 |
|
Resistivity
(µΩcm) |
8~10 (350°Cx30min)
12~15 (300°Cx30min)
|
~
20
|
~
3 |
~
3
|
~
10 |
~
10 |
3x104 |
| Substrates to be
used |
Substrates
having allowable temperature limit exceeding curing
temperature should be used
(e.g. glass, polyimide, Ni, Cu, ceramics etc) |
| Adhesion
Strength (kg/mm2)
|
<1 |
<1 |
>2 |
<1 |
<1 |
>2 |
<1 |
<1 |
>2 |
*1) 230°Cx10min in 8Pa Vac + 230°Cx60min
in Air
*2) Please consult us on the type not listed herein.
Specification in this sheet is subject to change without
notice.
For
more information |
|
TEL
: 978-686-7550/ FAX : 978-689-6300 |
|
| |
|
|
